When burning this one ImgBurn complained of errors and as I have had
many failed DVD9 I declined ImgBurn's offer to try to finalize the
DVD, after all it was only 59% complete at this point!
I just now put this' failed write' into drive E and it is playing the
audio content, but has no video content. The initial, opening 2/3
seconds of audio are scrambled, but the rest is good audio!
This in an unfinalized disc!
I guess if I had accepted ImgBurn's kind offer to finalize it then
this disc might have worked to some extent better than it does without
finalization. Might even have been playable in a standalone, though
maybe as audio only.
There is also a slight audio glitch at the end of track 10.
Other minimal glitches are on the begining of some tracks when it
sounds like the guitar is fluctuating in speed.
I don't know, but I guess these glitches were caused by the Light
Scribe drive in the writing process.
Main conclusion is that the original files on the hub are in good
order and will produce a good burn, on good media, on a good DVD write
drive and just to be on the safe side one could do a reboot of the PC
just before doing the write and write at a slow speed.
On 1 Oct, 14:02, realafrica <paul.gam...@gmail.com> wrote:
> Well what to think eh?
> My limited test was to write to NOT the best media, which I find makes
> a difference, especially with DL DVD9. It was the only DL media I had
> to hand.
> I wrote to the same media from the same box, so they are probably from
> the same manufacturing batch.
> As Quadstone is getting good burns using the 2080880 Layer Break from
> the DVDFab7 ini then I guess we can't assume a DVDFab7 problem, as I
> previously 'diagnosed'.
> I guess all we can conclude, so far, is that burning Double Layer DVD9
> discs is problematical and maybe there is a 50/50 chance of a coaster
> on cheap media! Possibly a better chance of a good burn on more
> expensive, better quality media like Verbatim.
>
> Other details:
> I used Ricoh branded for Tesco to make the write.
> I have 2 DVD writers installed, both LG.
> one is E drive the other is F drive.
> E is a considerably older drive.
> F is relatively new but is a LightScribe capable drive.
>
> I frequently experience PC hangs due to the Light Scribe, whether it
> is the driver or the drive I don't know but the hangs only occur when
> trying to burn a LS label. A reboot always cures the problem. Also if
> I use the F drive for writing DVDs then it might cause it to hang when
> wanting to burn a LS label. If I always use the older slower E drive
> for writing DVDs then use the F just for LS label burning it works
> fine.
> I mention all this because I think there is a problem with this F
> drive in relation to burning DL DVD9.
> Playback on the E is much more tolerant of minor faults on a disc that
> the F drive. E drive autoplays this successfull Emmylou burn, but F
> drive doesn't.
>
> My main conclusion is that it makes a difference as to which physical
> drive one uses to write a DVD9 Double Layer disc.
> Secondary conclusion is that Light Scribe writer is generally
> guaranteed good for burning labels only. Not guaranteed good for
> burning DVD9 Double Layer discs!
>
> It would be interesting to hear other people's experiences of writing
> DVD9 (DL) with Light Scribe DVD Burners.
>
> On 30 Sep, 23:36, Quadstone <darmac...@gmail.com> wrote:
>
>
>
> > Thanks for the heads up "realafrica", but I don't know what to think.
> > I just tried this again and I got a successful burn using the layer
> > break mentioned above (IMGBurn @ 2080880). I just ripped 45 DVD-A's
> > with DVDFAb 7 for posting on The Hub starting in October so I REALLY
> > hope the ini file setting is not off on them . I'll put a layerbreak
> > disclaimer in the folder "readme" at any rate. That being said, I also
> > have a lot of faith in IMGBurn's ability to recommend a layer
> > break..so I guess it's Caveat Emptor for ISO DL burns.
>
> > Regards:
> > Quadstone
>
> > On Sep 30, 3:43 pm, realafrica <paul.gam...@gmail.com> wrote:
>
> > > I tried a test burn of this DVD-A using the indicated Layer Break
> > > 2080880.
> > > This failed!
> > > I repeated the process, but this time removed the Layer Break info and
> > > had ImgBurn find the best place to make the Layer Break.
> > > This was a successful burn!
> > > All the content is intact and plays back on my Pioneer 610 that
> > > ignores watermarks.
> > > This album is definitely watermarked and the text note accompanying
> > > this file in my share states so.
> > > Info was taken from what Quadstone provided on Avax when he released
> > > this album there.
>
> > > My diagnoses is that we still have the same old layer break info
> > > problem in DVDFab 7 as it was in version 6!!!
>
> > > On 30 Sep, 16:22, Paul Garfunkel <paulgarfun...@gmail.com> wrote:
>
> > > > And that brings us back to doe!
>
> > > > On 9/28/10, Lokkerman <phil.steep...@gmail.com> wrote:
>
> > > > > Julie sadly is no more, she slipped through the filter by emulating a
> > > > > posting; nice attack though.
> > > > > Lokks
>
> > > > > _____
>
> > > > > From: surroundsound@googlegroups.com [mailto:surroundsound@googlegroups.com]
> > > > > On Behalf Of Julie Andrews
> > > > > Sent: 28 September 2010 15:23
> > > > > To: surroundsound@googlegroups.com
> > > > > Subject: Re: [SurroundSound] Re: Emmylou Harris - Producers DVD-A ISO + JW -
> > > > > Second Winter FLAC; are these valid?
>
> > > > > On Tue, Sep 28, 2010 at 6:56 PM, TMcD <timbregr...@bellsouth.net> wrote:
>
> > > > > That's unusual for disc-oriented folk to say the least, I don't recall
> > > > > any notes as such, guess this is something I'm supposed to know (and
> > > > > now do). My thought was to present it to the FLAC front end and see
> > > > > what the resulting WAV format was but it was rejected so I figured it
> > > > > was faulty. So I deleted it.
>
> > > > > On Sep 27, 1:22 pm, mugs <mug...@gmail.com> wrote:
> > > > >> The Johnny Winter is a multichannel flac file. It is indeed a valid
> > > > >> file I am listening to it right now. As for making it into a DVD-A I
> > > > >> dont know how thats going to work for you. This was not done as DTS it
> > > > >> was only multichannel. It is an upmix (mine to be exact). I play
> > > > >> everything from my PC so I dont have to worry with DTS encoding etc.
> > > > >> You may want to speak to MWC as he has made DVD-A from several of
> > > > >> these.
>
> > > > >> On Sep 27, 10:10 am, TMcD <timbregr...@bellsouth.net> wrote:
>
> > > > >> > Good day,
>
> > > > >> > I feel like I wasted a DVD9 yesterday; the resulting DVD-A wouldn't
> > > > >> > play on one (Samsung) universal player and the JVC DVD-A player
> > > > >> > displayed READING for a long time, then displayed a bizare green
> > > > >> > screen with lockup. Turned it off and then restarting it produced a
> > > > >> > rolling blue screen (no vertical sync?) Then I got a menu where I
> > > > >> > could change songs and photos but the JVC display read NO AUDIO.
>
> > > > >> > Johnny Winter - Second Winter FLAC - I haven't figured out how ImgBurn
> > > > >> > would work with FLAC + cue file so I presented the FLAC file to the
> > > > >> > FLAC decoder and it says the file was not valid. Can anyone verify
> > > > >> > this file works?
>
> > > > >> > I'm reluctant to try any more DVD-A burns that require DVD9s until I
> > > > >> > gain confidence in these files.
>
> > > > >> > Thanks, Timbre4- Hide quoted text -
>
> > > > >> - Show quoted text -
>
> > > > > --
> > > > > You received this message because you are subscribed to the Google Groups
> > > > > "SurroundSound" group.
> > > > > To post to this group, send email to SurroundSound@googlegroups.com
> > > > > To unsubscribe from this group, send email to
> > > > > SurroundSound-unsubscribe@googlegroups.com
> > > > > For more options, visit this group at
> > > > >http://groups.google.com/group/SurroundSound
>
> > > > > --
> > > > > Julie
> > > > >http://tradinglogically.blogspot.com<http://tradinglogically.blogspot.com>
>
> > > > > --
> > > > > You received this message because you are subscribed to the Google Groups
> > > > > "SurroundSound" group.
> > > > > To post to this group, send email to SurroundSound@googlegroups.com
> > > > > To unsubscribe from this group, send email to
> > > > > SurroundSound-unsubscribe@googlegroups.com
> > > > > For more options, visit this group at
> > > > >http://groups.google.com/group/SurroundSound
>
> > > > > --
> > > > > You received this message because you are subscribed to the Google Groups
> > > > > "SurroundSound" group.
> > > > > To post to this group, send email to SurroundSound@googlegroups.com
> > > > > To unsubscribe from this group, send email to
> > > > > SurroundSound-unsubscribe@googlegroups.com
> > > > > For more options, visit this group at
> > > > >http://groups.google.com/group/SurroundSound
>
> > > > --
> > > > Sent from my mobile device
--
You received this message because you are subscribed to the Google Groups "SurroundSound" group.
To post to this group, send email to SurroundSound@googlegroups.com
To unsubscribe from this group, send email to SurroundSound-unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/SurroundSound
No comments:
Post a Comment