Petty Anthology BDA and I have a few other BDA's that I've burned that
play, plus all retail blu-ray discs. You would think Sony wouldn't
cripple the PS3 since the PS3 was the reason they won the HD war vs.
HD-DVD.
On Oct 10, 11:34 am, grill <gr...@index.hu> wrote:
> It seems PS3 doesn't (fully) support the BD5 disc format.
>
> On okt. 10, 07:47, QTS <katelyn.and.da...@gmail.com> wrote:
>
> > I was pretty sure I had, but just burnt again to make sure, and with
> > the same results :(
>
> > On Oct 9, 8:54 pm, scolumbo <sacolu...@gmail.com> wrote:
>
> > > Did you use the mds file to load the iso into ImgBurn?
>
> > > On Oct 9, 10:48 pm, QTS <katelyn.and.da...@gmail.com> wrote:
>
> > > > Okay either I may be doing something wrong when burning, or my PS3 is
> > > > not cooperating. I burned the ISO to a DVD-R using ImgBurn. When I put
> > > > it in the drive, the PS3 recognizes it as a "Data Disc" and when I try
> > > > to play it, instead of loading it up like it would a normal movie, it
> > > > gives me a sub-menu (still in the PS3 software) of the discs folder
> > > > structure to browse through.
>
> > > > On Oct 9, 4:28 pm, grill <gr...@index.hu> wrote:
>
> > > > > Try DVDRW, it may work too.
>
> > > > > On okt. 10, 01:26, QTS <katelyn.and.da...@gmail.com> wrote:
>
> > > > > > I'm out of bluray disks, gonna pick some up from the store tomorrow,
> > > > > > and hopefully I can report back positively as well.
>
> > > > > > On Oct 9, 2:13 pm, scolumbo <sacolu...@gmail.com> wrote:
>
> > > > > > > WYWH Test disc works!
>
> > > > > > > I'm in USA so in must be a region coding issue as you surmised.
>
> > > > > > > On Oct 9, 12:16 pm, Brian Treml <britre...@gmail.com> wrote:
>
> > > > > > > > This is what I was refering to. Regardless of what terms are used to
> > > > > > > > describe things there is as a fact region coding and is as a fact an
> > > > > > > > inability of certain players in certain regions to play certain
> > > > > > > > encoded formats. So in carrying thru with with the Mr. Disney's quote
> > > > > > > > the menu is encoded in a certain format and the player says I can't
> > > > > > > > load this regardless of what the remainder of your disc content is
> > > > > > > > period. Good work as always Grill!!! I believe we have solved this
> > > > > > > > issue.
>
> > > > > > > > On Oct 8, 6:19 pm, grill <gr...@index.hu> wrote:
>
> > > > > > > > > Thanks Stephen for the info. Here's below the end part of the
> > > > > > > > > multiAVCHD log of my test authoring. It's been logged that that NTSC
> > > > > > > > > menus and NTSC welcome screen were created:
> > > > > > > > > ...
> > > > > > > > > [21:58:13] Preparing authoring information...
> > > > > > > > > [21:58:13] Creating NTSC top menu.
> > > > > > > > > [21:58:13] Setting pop-up menu...
> > > > > > > > > [21:58:14] *** [00000.mpls] - Adding pop-up menu [1080p]...
> > > > > > > > > [21:58:14] *** [00001.mpls] - Adding pop-up menu [1080p]...
> > > > > > > > > [21:58:14] *** Completed!
> > > > > > > > > [21:58:14] Authoring menu (NTSC).
> > > > > > > > > [21:58:14] Creating title thumbnails for 2 titles (CAR)...
> > > > > > > > > [21:58:19] Using 1 thumbnail/chapter links for title #1...
> > > > > > > > > [21:58:19] *** Extracting 1 chapter thumbnails...
> > > > > > > > > [21:58:19] *** Chapter #1 [00:00:00.000] set for thumbnail at
> > > > > > > > > [00:00:14.951]
> > > > > > > > > [21:58:22] Using 5 thumbnail/chapter links for title #2...
> > > > > > > > > [21:58:22] *** Extracting 5 chapter thumbnails...
> > > > > > > > > [21:58:22] *** Chapter #2 [00:13:43.336] set for thumbnail at
> > > > > > > > > [00:13:43.337]
> > > > > > > > > [21:58:22] *** Chapter #3 [00:21:13.512] set for thumbnail at
> > > > > > > > > [00:21:13.513]
> > > > > > > > > [21:58:22] *** Chapter #4 [00:26:57.162] set for thumbnail at
> > > > > > > > > [00:26:57.162]
> > > > > > > > > [21:58:22] *** Chapter #5 [00:32:01.782] set for thumbnail at
> > > > > > > > > [00:32:01.783]
> > > > > > > > > [21:58:24] Image processing for CAR menu completed!
>
> > > > > > > > > [21:58:24] Preparing menu pages...
>
> > > > > > > > > [21:58:24] Encoding static CAR menu page [1/2] [Static title
> > > > > > > > > thumbnail].
> > > > > > > > > [21:58:42] Encoding static CAR menu page [1/2]: Chapter page [1/1].
>
> > > > > > > > > [21:58:46] Encoding static CAR menu page [2/2] [Static title
> > > > > > > > > thumbnail].
> > > > > > > > > [21:58:52] Encoding static CAR menu page [2/2]: Chapter page [1/1].
> > > > > > > > > [21:58:57] Menu authoring completed.
>
> > > > > > > > > [21:58:57] Encoding Title List menu page [1/1].
> > > > > > > > > [21:59:09] Authoring welcome screen (NTSC).
> > > > > > > > > [21:59:09] Encoding welcome screen...
> > > > > > > > > [21:59:22] Authoring welcome screen completed.
> > > > > > > > > [21:59:23] Setting main menu for 2 titles...
> > > > > > > > > [21:59:23] Playback will end after title #2.
> > > > > > > > > [21:59:23] Setting menu properties...
> > > > > > > > > [21:59:23] Selected TV system: [NTSC]
> > > > > > > > > [21:59:23] Processing clip (CPI/CLPI) files...
> > > > > > > > > [21:59:23] Completed.
> > > > > > > > > [21:59:23] Setting Blu-ray format...
> > > > > > > > > [21:59:25] Done!
>
> > > > > > > > > [21:59:25] Saving multiAVCHD quick-load project (mpf):
> > > > > > > > > [21:59:25] D:\DVD\WYWH\BD\AVCHD\multiAVCHD.mpf (OK!)
>
> > > > > > > > > Compilation summary:
> > > > > > > > > Format: Blu-ray player (BD-R/BD-RE disc)
> > > > > > > > > Name : WYWH_test_NTSC
> > > > > > > > > ===============================================================================
> > > > > > > > > 1. Release message [00:00:29]
> > > > > > > > > 2. britre (Harvest Q4SHVL814 SQ-LP) [00:45:05]
> > > > > > > > > ===============================================================================
> > > > > > > > > Overall duration : 00:45:35
> > > > > > > > > Output size : 993 MiB (0.97 GiB)
>
> > > > > > > > > [21:59:25] D:\DVD\WYWH\BD\AVCHD folder created (AVCHD/Blu-ray output)!
> > > > > > > > > [21:59:25] Burn its CONTENTS to BD-R/RE UDF 2.50/2.60 disc!
> > > > > > > > > [21:59:27] Select folder/name for ISO file...
> > > > > > > > > [21:59:46] Using ISO mode / destination: D:\DVD\WYWH\BD_
> > > > > > > > > \WYWH_test_NTSC.iso
> > > > > > > > > [21:59:46] Launching ImgBurn...
> > > > > > > > > [22:00:53] You may now remove temp folder (D:\Temp
> > > > > > > > > \multiTEMP-20101008\).
> > > > > > > > > [22:00:53] Your compilation contains 0hrs 45min 35sec of video
> > > > > > > > > material.
>
> > > > > > > > > [22:00:53] multiAVCHD finished in 197.466 seconds (00:03:17.465)!
>
> > > > > > > > > [22:00:53] End of log.
>
> > > > > > > > > On okt. 9, 00:44, Stephen Disney <sthunderroc...@gmail.com> wrote:
>
> > > > > > > > > > I won't argue any more... but I dislike disinformation. One of MANY
> > > > > > > > > > possible quotes... this one from forum.bluray.com...
> > > > > > > > > > S
>
> > > > > > > > > > I believe your last questions answer is NTSC and PAL neither exist anymore
>
> > > > > > > > > > > for HD broadcasts. It's either MPEG2 or maybe MPEG4/AVC. Depending on which
> > > > > > > > > > > channels you have which broadcast HD content.
>
> > > > > > > > > > > Only thing that's NTSC or PAL anymore with any Blu-ray disc is more often
> > > > > > > > > > > then not SD resolution extras. If you have a display button on your remote
> > > > > > > > > > > for your Blu-ray disc player, which I'm sure you will, push it and look to
> > > > > > > > > > > see whether or not the signal being displayed is MPEG2, AVC or VC-1 and what
> > > > > > > > > > > resolution it's in. 480i/p is NTSC and 576i/p is PAL. Now the little "i"
> > > > > > > > > > > denotes interlaced and the little "p" denotes progressive.
> > > > > > > > > > > Actually what it comes down to is how the overall intended look of the
> > > > > > > > > > > film, looks as it's hard encoded to the disc whilst broadcast HD is
> > > > > > > > > > > "bitstreaming" over the carrier you have. As such the bitstreaming HD will
> > > > > > > > > > > of course have more artifacting and moiring, generally, compared to hard
> > > > > > > > > > > encoded discs.
>
> > > > > > > > > > Here's hoping the previous paragraphs were of assistance.
>
> > > > > > > > > > On Fri, Oct 8, 2010 at 4:58 PM, grill <gr...@index.hu> wrote:
> > > > > > > > > > > The "NTSC" test version in iso is in my Hub share (Test/WYWH/NTSC). It
> > > > > > > > > > > contains the release message and Britre's UK SQ-LP conversion.
>
> > > > > > > > > > > On okt. 8, 14:32, Brian Treml <britre...@gmail.com> wrote:
> > > > > > > > > > > > The region free burning is a good theory. If you read the specs of the
> > > > > > > > > > > > WYWH BR it states it was burned PAL or Region B. Therefore it goes to
> > > > > > > > > > > > pass that if you have a Region A player it will be a frisbie to that.
> > > > > > > > > > > > I in fact had this trouble with the Muse DVD-A which would not play
> > > > > > > > > > > > until I found a Region 1 rip for here in the USA. There was also a
> > > > > > > > > > > > really good Paul Macrtney Back To The Egg DVD that needed conversion
> > > > > > > > > > > > to play. So perhaps we need to simply re-author the WYWH BR to be
> > > > > > > > > > > > region free?
>
> > > > > > > > > > > > On Oct 8, 3:03 am, grill <gr...@index.hu> wrote:
>
> > > > > > > > > > > > > I'm honestly not an expert on this. However, multiAVCHD tutorial
> > > > > > > > > > > > > highly recommends to choose the TV system during the authoring. Pehaps
> > > > > > > > > > > > > other output formats supported by multiAVCHD need that:
> > > > > > > > > > >http://multiavchd.deanbg.com/tutorial.php
>
> > > > > > > > > > > > > On okt. 8, 03:41, Stephen Disney <sthunderroc...@gmail.com> wrote:
>
> > > > > > > > > > > > > > People are using misnomers here. There is NO pal or ntsc on blu-ray.
> > > > > > > > > > > There
> > > > > > > > > > > > > > IS region coding, but it is also possible to build a region free
> > > > > > > > > > > disc. 70%
> > > > > > > > > > > > > > of studio releases are region free.
> > > > > > > > > > > > > > S
>
> > > > > > > > > > > > > > On
>
> ...
>
> read more »
--
You received this message because you are subscribed to the Google Groups "SurroundSound" group.
To post to this group, send email to SurroundSound@googlegroups.com
To unsubscribe from this group, send email to SurroundSound-unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/SurroundSound
No comments:
Post a Comment